STEP 1- Open frame as a small unit
STEP 2- Place cover over partially opened frame and velcro all corners of cover positions to frame corners
STEP 3- With 1 person at each end lift the whole frame and cover of the ground pushing upwards and walking backwards make sure all the legs are of the ground the unit will spread apart and self adjust to proper postion then simply lock in the corners with spring locks
STEP 4- Final Velcro all fixing points to cover and frame and set your desired height level with telescopic legs

STEP 5 – Secure marquee at four corners at all times due to changes in weather conditions we recommend some ideas below if setting up on hard surfaces always use pegs and ropes on soft surface

Packing away your marquees from Betta Marquee

STEP 1- Unfasten Velcro strap underneath the roof
STEP 2- With one person at each end lower all upright poles to their lowest setting. Continuing to work on opposite sides remove all upper corner pins to release.
STEP 3- With one person at each end hold the highest point of the scissor bars and push upwards at the same time.
STEP 4- Ensuring all legs are off the ground walk towards the centre and the marquee will close naturally.